AlienVault® USM Anywhere™


When you configure PacketFence to send log data to USM Anywhere, you can use the PacketFence plugin to translate raw log data into normalized events for analysis. The table below provides some basic information for the plugin:

Plugin Information
Device Details
Vendor Inverse Inc.
Device Type Network Access Control
Connection Type Syslog

Integrating PacketFence

Before you configure the PacketFence integration, you must have the IP Address of the USM Anywhere Sensor.

To configure PacketFence to send Syslog messages to USM Anywhere

Log data collection and Syslog output to USM Anywhere is configured by modifying log.conf with a SYSLOG appender. For example:

log4perl.rootLogger=DEBUG, LOGFILE, SYSLOG = INFO





log4perl.appender.LOGFILE.layout.ConversionPattern=%d{MMM dd HH:mm:ss} %X{proc}(%X{tid}) %p: %m (%M)%n

log4perl.appender.SYSLOG = Log::Dispatch::Syslog

log4perl.appender.SYSLOG.ident = packetfence

log4perl.appender.SYSLOG.facility = local5

log4perl.appender.SYSLOG.layout = Log::Log4perl::Layout::SimpleLayout

After creating the appender file, make sure you include your entry in /etc/rsyslog.conf (RHEL), for example:

local5. * @your_syslog

After making changes to the log configuration, restart syslog to have the changes take effect.

Note: Make sure you configure the correct log that you want to send under /usr/local/pf/conf/log.conf.d/.

Plugin Enablement

For plugin enablement information, see Manual Integration Management.

Available Plugin Fields

The following plugin fields are important attributes extracted from the syslog message. The USM Anywhere reports use these fields, and you can also reference them when creating custom reports. In addition to reporting, the USM Anywhere correlation rules make use of these fields.

  • customfield_0
  • customfield_1
  • customheader_0
  • customheader_1
  • destination_address
  • destination_mac
  • destination_ntdomain
  • event_description
  • event_group_type
  • event_name
  • event_severity
  • file_path
  • rep_device_hostname
  • rep_device_mac
  • source_address
  • source_mac
  • source_username
  • user_role

Additional Resources and Troubleshooting

For troubleshooting, refer to the vendor documentation: